Kontron AM4020 uEFI BIOS - Manual (Page 47)

AM4020 uEFI BIOS The uEFI Shell
ID 1036-5670, Rev. 3.0 Page 41
P R E L I M I N A R Y
6.2.3 kboot uEFI Shell Command
kboot
FUNCTION: Boot a legacy OS
Not to be used for uEFI BootLoaders!
SYNTAX: kboot [-?|-d|-p|-p |-n |-t ]
where:
? Show online help
-d Boot default order
-p Specify the path to the device to boot from
-n Specify the device name to boot from
-t Specify the device type to boot from
Available types are:
floppy
harddrive
cdrom
network
usb-floppy
usb-harddrive
usb-cdrom
DESCRIPTION: The kboot command boots a legacy OS. Boot device can be selected in
a very flexible way. If the requested device is not present, boot returns
to shell. The kboot command cannot boot native uEFI-aware operating
systems. But since these are bootable from shell by calling their
bootloader, this is not necessary either. If a requested device is present
but not bootable, uEFI continues to boot with the next bootable device in
the boot order.