Kontron AM4020 uEFI BIOS - Manual (Page 34)

Security Setup AM4020 uEFI BIOS
Page 28 ID 1036-5670, Rev. 3.0
P R E L I M I N A R Y
4.1 Administrator Password
This function is used to set, change or delete the Administrator password. If there is already a
password installed, the system asks for this first. To clear a password, simply enter nothing and
acknowledge by pressing Return. To set a password, enter it twice and acknowledge by press-
ing Return.
Note: The password is case sensitive.
4.2 User Password
This function is used to set, change or delete the User password. If there is already a password
installed, the system asks for this first. To clear a password, simply enter nothing and acknowl-
edge by pressing Return. To set a password, enter it twice and acknowledge by pressing Re-
turn.
Note: The password is case sensitive.
4.3 Remember the Password
It is highly recommended to keep a record of all passwords in a safe place. Forgotten pass-
words may lead to being completely locked out of the system. Booting may not be possible,
and in worst case the uEFI BIOS Setup program will also not be accessible.
If the system cannot be booted because neither the User password nor the Administrator pass-
word are known, refer to Chapter 4.1 in the AM4020 User Guide for information about clearing
the uEFI BIOS settings, or contact Kontron for further assistance.