Kontron AM4020 uEFI BIOS - Manual (Page 19)

AM4020 uEFI BIOS Main Setup
ID 1036-5670, Rev. 3.0 Page 13
P R E L I M I N A R Y
2.5 Serial Port Console Redirection
This screen provides information about functions for specifying the Serial Port Console Redi-
rection configuration settings. Console redirection can be used to remotely operate system set-
tings and the EFI console.
2.5.1 COM0
The COM0 port (serial port 0) in the uEFI BIOS corresponds to the COM1 serial port on the
front panel of the AM4020.
2.5.1.1 Console Redirection
Default setting: Enabled
2.5.1.2 Console Redirection Settings
For information about this function, refer to Chapter 2.5.4 in this manual.
A p t i o S e t u p U t i l i t y - C o p y r i g h t ( C ) 2 0 0 9 A m e r i c a n M e g a t r e n d s , I n c .
M a i n B o o t S e c u r i t y S a v e & E x i t
COM0
Console Redirection [Enabled]
 Console Redirection Settings
COM4
Console Redirection [Port Is Disabled]
Serial Port for Out-of-Band Management/
Windows Emergency Management Services (EMS)
Console Redirection [Disabled]
Out-of-Band Mgmt Port [COM0]
Data Bits 8
Parity None
Stop Bits 1
Terminal Type [VT-UTF8]

: Select Screen

: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3 Optimized Defaults
F4: Save ESC: Exit
Ve r s i o n 2 . 0 0 . 1 2 0 1 . C o p y r i g h t ( C ) 2 0 0 9 A m e r i c a n M e g a t r e n d s , I n c .
SETTING DESCRIPTION
Disabled Use this setting to disable console redirection for the serial port 0.
Enabled Use this setting to enable console redirection for the serial port 0.