Kontron AM4020 uEFI BIOS - Manual (Page 44)

The uEFI Shell AM4020 uEFI BIOS
Page 38 ID 1036-5670, Rev. 3.0
P R E L I M I N A R Y
SETTINGS StorageOrom: Launch Storage PCI Option ROMs
disabled: Do not launch storage PCI option ROMs. This includes the
onboard RAID option ROM.
[enabled]: Launch storage option ROMs, if present
HyperThreading: Enable/Disable Hyper-Threading Technology
CpuTurbo: Enable/Disable CPU Turbo Boost Technology
PrimaryDisplay: Select primary display device
[auto]: Automatically detect primary display device
igd: Use internal graphics, if enabled
peg: Try to use video on the PCIe graphics port, if present
pci: Try to use video on the PCI(e) bus first
SataMode: Determines how SATA controllers operate
[ide]: SATA ports operate as two IDE controllers
ahci: SATA ports operate as one 6-port AHCI controller
raid: SATA ports form a RAID device
wr_prot_eeprom: System EEPROM write protection
[disabled]: Do not write protect the system EEPROM
enabled: System EEPROM is write-protected after POST
wr_prot_sata: Onboard SATA flash write protection
[disabled]: Do not write protect the onboard SATA flash
enabled: The onboard SATA flash is write-protected after POST. OS
needs to be prepared to work with write-protected flash. For further
information, refer to the operating system’s documentation.
wr_prot_spi: EFI SPI flash write protection
[disabled]: Do not write protect the EFI SPI flash
enabled: The EFI SPI flash is write-protected after POST
kboardconfig (continued)