Kontron AM4150 U-Boot Bootloader - Manual (Page 42)

U-Boot Usage AM4150 U-Boot Bootloader
Page 42 ID 1052-5678, Rev. 1.0
P R E L I M I N A R Y
6.5 Using SATA Devices
SATA devices are supported (read only) with the “ext2” or “fat” file system.
In both cases, the SATA devices must be initialized first.
After that, the contents can be verified with:
in case of the ext2 file system, or with
in case of the fat file system.
To load a file into memory, the commands “ext2load” or “fatload” can be used, for example:
which loads the file “kernel.bin” from the SATA device to memory address 0x1000000.
sata init
ext2ls sata 0
fatls sata 0
ext2load sata 0 1000000 kernel.bin