Kontron AM5020 - Manual (Page 22)

Introduction AM5020
Page 1 - 4 ID 1043-6198, Rev. 1.0
P R E L I M I N A R Y
1.2 Board-Specific Information
Due to the outstanding features of the AM5020, such as superior processing power and flexible
interconnect topologies, this AMC module provides a highly scalable solution not only for a
wide range of telecom and data network applications, but also for several highly integrated
industrial environment applications with solid mechanical interfacing.
Some of the AM5020's outstanding features are:
• Support for the following processors:
• Intel® Core™ i7-610E (SV) processor with ECC, 2.53 GHz, 4 MB L3 cache
• Intel® Core™ i7-620LE (LV) processor with ECC, 2.0 GHz, 4 MB L3 cache
• Intel® QM57 Express Chipset
• Up to 8 GB, dual-channel, DDR3 SDRAM memory with ECC running at 1066 MHz
• Integrated 3D high performance graphics controller
• Display support for resolutions up to
1920 x 1200 pixels @ 60 Hz using HDMI and DVI
• AMC interconnection:
• Dual Gigabit SerDes connection in the Common Options Region
• Dual SATA storage interface in the Common Options Region
• Two x4 or eight x1 PCI Express in the Fat Pipes Region (operates at 2.5 GT/s and as
a root complex controller only)
• Dual SATA storage interface in the Extended Options Region
• Serial port in the Extended Options Region
• Debug port in the Extended Options Region
• Bidirectional PCI Express reference clock, FCLKA
• Full hot swap support
• One Intel® 82580EB Quad Gigabit Ethernet Controller
• Onboard extension connector for a dedicated SATA Flash module with up to 32 GB
NAND flash memory
• Onboard SATA connector for onboard SATA 2.5” HDD/SSD
• One DVI-D port on front I/O
• Two USB 2.0 host ports on front I/O
• Two Gigabit Ethernet ports on front I/O
• One serial port (RS-232) on front I/O
• TCG 1.2-compliant Trusted Platform Module (TPM), on request
• Two redundant SPI flash chips for uEFI BIOS (2 x 8 MB)
• Battery-backed real time clock (RTC)
• Dedicated IPMI Module Management Controller with redundant firmware flash (2 x 512 kB)
• Watchdog timer
• JTAG interface for debugging and manufacturing
• Four bicolor User-Specific LEDs providing, for example, debugging and POST code in-
formation, etc.
• Two onboard DIP switches, for example, for selecting the uEFI BIOS SPI flash, overwrit-
ing E-Keying, etc.
• Standard temperature range: -5°C to + 55°C
• Thermal management
• Passive heat sink solution for forced airflow cooling
• Double Mid-size AMC module
• AMI Aptio®, a uEFI-compliant platform firmware