Kontron AM4311 - Manual (Page 41)

Functional Description
Page 26 AM4311 User Guide
2.5.2.4 OEM Get SFP Data
Example:
Module in AMC bay B1 (IPMB-L address 0x7a), ipmitool invokes on carrier (AT8404)
ipmitool -t 0x7a -b 7 -l 3 raw 0x30 0xa0 0xac 0xce 0xca 0xcf 0xcf
2.5.3 Configuring Port Settings
The port settings can be configured using the ipmitool on Kontron ATCA AMC carrier board
ipmitool raw [CMD-DATA]
IPMB-ADDRESSES:
AMC slot A1: 0x72
AMC slot A2: 0x74
AMC slot A3: 0x76
AMC slot A4: 0x78
Command Name NetFn LUN Command Number
CmdGetSfpData 30h
Byte Num Data Field
Request Data 1 Pass Code 0: ~’S’
2 Pass Code 1: ~’1’
3 Pass Code 2: ~’5’
4 Pass Code 3: ~’0’
5 Pass Code 4: ~’0’
6 0 – SFP#1
1 – SFP#2
2 – SFP#3
3 – SFP#4
7 Offset
8 Count
Response Data 1 Completion Code
D5h – when payload is not applied
CEh – when SFP is not present
C9h – when maximum count is exceeded, or when invalid SFP ID
2 Count n returned DATA bytes
3 .... n DATA bytes