Canon 850 IS - Manual (Page 44)

42
Before recording, you can set the AE lock (p. 49) and
exposure shift.
1. Press the
button.
The exposure will lock (AE lock) and the exposure shift
bar will appear in the LCD monitor.
2. Use the or button to adjust the exposure.
Press the button again to release the setting. Also,
the setting will be canceled if you press the MENU button
or change the white balance, My Colors or shooting
mode settings.
QuickTime 3.0 or later is required to play back movies
(Data type: AVI/Compression method: Motion JPEG) on a
computer. QuickTime (for Windows) is included on the
Canon Digital Camera Solution Disk. On the Macintosh
platform, this program is standard with Mac OS X or later.
You are recommended to use a memory card that has
been formatted in your camera to shoot movies
(p. 29) .
The card supplied with the camera may be used without
further formatting.
Be careful of the following while recording.
- Try not to touch the microphone.
- Do not press any buttons other than the shutter button. The
sound that buttons make will be recorded in the movie.
- The camera will automatically adjust the exposure and
white balance to suit the shooting conditions during
recording. Please note, however, that the sounds made
by the camera automatically adjusting the exposure may
also be recorded.
The focus and optical zoom settings remain fixed for
subsequent frames at the values selected for the first frame.
Do not aim the camera toward the sun to shoot.