Kontron KTQ67-FLEX - Manual (Page 50)

KTQ67 Users Guide
KTD-N0829-G Page 50
Warning: Don’t leave the jumper in position 1-2, otherwise if power is disconnected,
the battery will fully deplete within a few weeks.
6.11 ”Load Default BIOS Settings” Jumper (J11)
The “Load Default BIOS Settings” Jumper (J11) can be used to recover from incorrect BIOS settings. As
an example, incorrect BIOS settings coursing no display to turn on can be erased by the Jumper.
The Jumper has 3 positions: Pin 1-2, Pin2-3 (default position) and not mounted.
To Load Default BIOS Settings:
1. Turn off power completely (no SB5V).
2. Move the Jumper to pin 1-2 for ~10 seconds.
3. Move the Jumper back to position 2-3 (default position).
4. Turn on power (use the Power On Button if required to boot).
5. Motherboard might automatically reboot a few times. Wait until booting is completed.
6.12 ClrRTC (J12)
The ClrRTC (J12) connector is not used. Do not install any jumper in position 1-2 or leave the Jumper in
position 2-3. The J12 might be removed in the future.
J11
Description
pin1-2 pin2-3
X - Load Default BIOS Settings
- X Default position
- - No Function
Internal Connectors
!
Jumper (in Load Default BIOS Settings position)
J11 pin 3
J12 pin 1