3 gigabit ethernet interfaces, Gigabit ethernet interfaces - 6, J18b j18a – Kontron CP-RIO6-001-HD-VGA User Manual
Page 28: Functional description cp-rio6-001-hd-vga
Functional Description
CP-RIO6-001-HD-VGA
Page 2 - 6
ID 1052-4138, Rev. 1.0
2.1.3
Gigabit Ethernet Interfaces
The CP-RIO6-001-HD-VGA provides a Gigabit Ethernet interface implemented as one dual,
RJ-45 Ethernet connector J18A/B.
Ethernet LED Status
ACT (green): This LED monitors network connection and activity. When this LED is lit, it means
that a link has been established. The LED blinks when network packets are sent or received
through the RJ-45 port. When this LED is not lit, there is no link established.
LINK (green): This LED lights up to indicate a successful 100Base-TX connection. When not
lit and the ACT-LED is active, the connection is operating at 1000Base-T or 10Base-T.
Note ...
The Ethernet transmission can operate effectively with structured cable that
meets CAT5 cable or higher specifications.
Figure 2-4: Dual Gigabit Ether-
net Con. J18A/B
J18B
J18A
8
1
8
1
Table 2-4: Pinout of Dual GbE Connector J18A/B
PIN
MDI / STANDARD ETHERNET CABLE
10BASE-T
100BASE-TX
1000BASE-T
I/O
SIGNAL
I/O
SIGNAL
I/O
SIGNAL
1
O
TX+
O
TX+
I/O
BI_DA+
2
O
TX-
O
TX-
I/O
BI_DA-
3
I
RX+
I
RX+
I/O
BI_DB+
4
-
-
-
-
I/O
BI_DC+
5
-
-
-
-
I/O
BI_DC-
6
I
RX-
I
RX-
I/O
BI_DB-
7
-
-
-
-
I/O
BI_DD+
8
-
-
-
-
I/O
BI_DD-