Kontron CP-RIO3-04S - Manual (Page 35)

CP-RIO3-04S Installation
ID 1036-1669, Rev. 1.0 Page 3 - 3
3. Installation
The CP-RIO3-04S has been designed for easy installation. However, the following standard
precautions, installation procedures, and general information must be observed to ensure
proper installation and to preclude damage to the CP-RIO3-04S, other system components, or
injury to personnel.
3.1 Safety Requirements
The following safety precautions must be observed when installing or operating the CP-RIO3-
04S. Kontron assumes no responsibility for any damage resulting from failure to comply with
these requirements.
Caution!
Ensure that the system main power is removed prior to installing or removing
the CP-RIO3-04S. Ensure that there are no other external voltages or signals
being applied to the CP-RIO3-04S or other boards within the system. Failure
to do so could endanger your life or health and may damage the CP-RIO3-04S
or other system components including process-side signal conditioning
equipment.
ESD Equipment!
The CP-RIO3-04S contains electrostatically sensitive devices. Please observe
the necessary precautions to avoid damage to the CP-RIO3-04S:
• Discharge your clothing before touching the assembly. Tools must be dis-
charged before use.
• Do not touch components, connector-pins or traces.
• If working at an anti-static workbench with professional discharging
equipment, please do not omit to use it.