Kontron CP-RIO3-04S - Manual (Page 15)

CP-RIO3-04S Introduction
ID 1036-1669, Rev. 1.0 Page 1 - 3
1. Introduction
1.1 Board Overview
The CP-RIO3-04S 3U CompactPCI rear transition module has been designed for use with the
CP305, CP307, and CP308 3U CompactPCI CPU boards from Kontron and provides
comprehensive rear I/O functionality for peripherals. In order to use the CP-RIO3-04S, a 3U
CompactPCI backplane with rear I/O support as well as a compatible and correctly configured
CPU board are required. For further information concerning possible compatibility with other
3U Kontron CompactPCI boards, please contact Kontron.
The CP-RIO3-04S comes with two Gigabit Ethernet ports and one VGA (CRT) port on the front
panel, two COM ports (COM1 on the front panel and COM2 onboard), two onboard SATA ports
for connection to external SATA devices, one onboard peripheral control port and one Com-
pactPCI connector for connecting the CP-RIO3-04S to the backplane.
1.2 Board Diagrams
The following diagrams provide additional information concerning the boards’ functionality and
component layout.
1.2.1 Functional Block Diagram
Figure 1-1: CP-RIO3-04S Functional Block Diagram
Onboard
Connector Front Panel
Connector
CPCI
Connector
rJ2
SATA II
Components
RS-232
COM1
(RJ-45)
2x Mag 2x Ethernet
RS-232
Control
VGA VGA
2x GbE
(RJ-45)
Peripheral
Control Con.
COM2
(10-pin)
SATA
Connector
SATA II
Repeater
SATA
Connector
SATA II
SATA II SATA II
2x Ethernet