Kontron CP932 - Manual (Page 32)

Functional Description CP932
Page 2 - 6 © 2005 Kontron Modular Computers GmbH ID 30048, Rev. 01
3004
8.01.UG.VC.050622/19130
1
P R E L I M I N A R Y
2.5 Board Interfaces
2.5.1 Gigabit Ethernet Interfaces
The Ethernet wire cabling interface is implemented using five 8-pin, female, RJ45 connectors.
Connectors J4A - J4D are implemented as channels 1 - 4, and connector J5 is implemented
as channel 5. As the Gigabit Ethernet controller is able to automatically detect the cabling con-
figuration and Ethernet standard in use, the pinout of the individual connectors is a function of
the implementation.
The following figure illustrates the pinout and LED positioning of the J4 and J5 connectors.
Figure 2-2: Gigabit Ethernet Connectors J4A - J4D and J5
The Ethernet connectors are realized as RJ45 connectors. The interfaces provide automatic
detection and switching between 10Base-T, 100Base-TX and 1000Base-T data transmission.
Auto-wire switching for crossed cables is also supported.
J5
J4D
J4C
J4B
J4A
8
1
8
8
1
1
8
1
8
1