Kontron CP932 - Manual (Page 25)

CP932 Introduction
ID 30048, Rev. 01 © 2005 Kontron Modular Computers GmbH Page 1 - 9
3004
8.01.UG.VC.050622/19130
1
P R E L I M I N A R Y
1.4 Technical Specifications
Table 1-2: CP932 Main Specifications
GROUP TYPE DESCRIPTION
Controllers
BCM5385 / BCM5388
Gigabit Ethernet Switch
Controller from Broadcom On the five-channel variant:
Broadcom BCM5385 high-performance, five-port Gigabit Ethernet
switch controller with
• Four integrated PHYs, and
• One RGMII interface
in 324-pin FBGA package.
On the six-channel variant:
Broadcom BCM5388 high-performance, eight-port Gigabit Ethernet
switch controller with
• Four integrated PHYs, and
• Four RGMII interfaces
in 324-pin FBGA package.
PCI Gigabit Ethernet Con-
troller Only on the six-channel variant:
• Intel 82541PI PCI Gigabit Ethernet controller
Internal
Interfaces
PCI Bus Only on the six-channel variant:
• 32-bit, 33/66 MHz PCI bus compliant with the CompactPCI Spec-
ification, V. 2.0, Rev. 3.0
• universal signaling: 3.3 V or 5 V V(I/O)
• PCI interrupt INTA#
External
Interfaces
Front Panel Connectors • five, 8-pin, female, RJ45 connector(s)
• The CP932 supports up to five channels of full or half duplex
10Base-T, 100Base-TX, 1000-Base-T Ethernet operation with up
to 100 meters cable length.
Onboard Connectors • One CompactPCI connector
• One ATX power connector (only on the five-channel variant)
Indicators
Front Panel LEDs Two bicolor LEDs per channel are provided for indicating the
Ethernet channel operational status:
ACT LED (Green):
• ACT ON: Ethernet Link
• ACT OFF: No Ethernet Link
• ACT BLINKING: Ethernet Activity
SPEED LED (Green/Yellow):
• SPEED ON (green): 100 Mbit
• SPEED ON (yellow): 1000 Mbit
• SPEED OFF: 10 Mbit
Thermal
Aspects
Heat Sink The CP932 is fitted with an optimally designed heat sink to
ensure overtemperature protection.
Forced Air Flow For proper operation at the specified temperatures, a minimum
airflow of 1 m/s is required.