7 option rom messages, 8 interrupt 19 capture, Option rom messages – Kontron CP3002 uEFI User Manual
Page 29: Interrupt 19 capture, Cp3002/-rc/-ra uefi bios boot setup
CP3002/-RC/-RA uEFI BIOS
Boot Setup
ID 1042-8946, Rev. 3.0
Page 23
P R E L I M I N A R Y
3.1.7
Option ROM Messages
This function is used to control the messages of the loaded PCI option ROMs.
Default setting: Force BIOS
3.1.8
Interrupt 19 Capture
This function is used to specify if legacy PCI option ROMs are allowed to capture software in-
terrupt 19h.
Default setting: Disabled
SETTING
DESCRIPTION
Force BIOS
Use this setting to force to a BIOS-compatible output. This will show the option ROM mes-
sages.
Keep Current
Use this setting to keep the current video mode. This will suppress option ROM messages.
Option ROMs requiring interactive inputs may not work properly in this mode.
SETTING
DESCRIPTION
Disabled
Use this setting to prevent legacy PCI option ROMs from capturing software interrupt 19h.
Enabled
Use this setting to allow legacy PCI option ROMs to capture software interrupt 19h.