Kontron CP3002 uEFI - Manual (Page 20)

Main Setup CP3002/-RC/-RA uEFI BIOS
Page 14 ID 1042-8946, Rev. 3.0
P R E L I M I N A R Y
2.5.4.3 Data Bits
This is a display-only function providing information about the frame width for the Out-of-Band
Management.
2.5.4.4 Parity
This is a display-only function providing information about the parity for Out-of-Band Manage-
ment.
2.5.4.5 Stop Bits
This is a display-only function providing information about the number of stop bits for Out-of-
Band Management.
2.5.4.6 Terminal Type
Default setting: VT-UTF8
SETTING DESCRIPTION
VT100 Use one of these settings to select the terminal type for out-of-band management.
VT100+
VT-UTF8
ANSI