Kontron CP3002 - Manual (Page 34)

Introduction CP3002
Page 1 - 14 ID 1042-9252, Rev. 2.0
P R E L I M I N A R Y
Gene
ral
Mechanical 3U, 4HP, CompactPCI-compliant form factor
Power Consumption See Chapter 5 for details.
Temperature Range Operational: 0°C to +60°C Standard (depending on processor version
and airflow in the system)
-25°C to +70°C Extended (depending on processor version
and airflow in the system)
Storage: -55°C to +85°C Without hard disk and without battery
Battery 3.0V lithium battery for RTC with battery socket.
Recommended type: CR2025
Temperature ranges:
Operational (load): -20°C to +70°C typical (refer to the battery manufac-
turer’s specifications for exact range)
Storage (no load): -55°C to +70°C typical (no discharge)
Climatic Humidity 93% RH at 40 °C, non-condensing (acc. to IEC 60068-2-78)
Dimensions 100 mm x 160 mm
Board Weight 337 grams (4 HP CP3002 with heat sink, front panel, two 2 GB SODIMM mem-
ory modules, and battery but without SATA Flash module)
Note ...
For a description of the additional 8HP version interfaces, refer to Appendix A,
CP3002-HDD Module.
Table 1-1: CP3002 Main Specifications (Continued)
FEATURES SPECIFICATIONS
Note ...
When a battery is installed, refer to the operational specifications
of the battery as this determines the storage temperature of the
CP3002 (See "Battery" below).
Note ...
When additional components are installed, refer to their opera-
tional specifications as this will influence the operational and stor-
age temperature of the CP3002.