Kontron CP3002 - Manual (Page 25)

CP3002 Introduction
ID 1042-9252, Rev. 2.0 Page 1 - 5
P R E L I M I N A R Y
1.3 System Expansion Capabilities
1.3.1 CP3002-HDD Module
The CP3002-HDD module for the 8HP CP3002 version provides legacy PC I/O ports. It
includes one digital DVI port, two USB 2.0 ports, one COM port, and one CFast card socket. A
SATA hard disk interface is also available for installing a Serial ATA 2.5” HDD or SSD. The
CP3002-HDD module cannot be used in conjunction with the SATA Flash module.
For further information concerning the CP3002-HDD module, refer to Appendix A.
1.3.2 CP-RIO3-04 Rear I/O Module
The CP-RIO3-04 rear I/O module has been designed for use with the CP3002 board from
Kontron and provides comprehensive rear I/O functionality.
For further information concerning the CP-RIO3-04 rear I/O module, refer to Appendix B.
1.3.3 Serial ATA Flash Module
The 4HP CP3002 provides support for up to 16 GB of Serial ATA flash memory in combination
with an optional Serial ATA Flash module, which is connected to an onboard connector. For fur-
ther information concerning the Serial ATA Flash module, refer to Appendix C.
1.4 Board Diagrams
The following diagrams provide additional information concerning board functionality and
component layout.