beautypg.com

Cp3002 introduction – Kontron CP3002 User Manual

Page 33

background image

CP3002

Introduction

ID 1042-9252, Rev. 2.0

Page 1 - 13

P R E L I M I N A R Y

Ti

m

er

Watchdog Timer

Software-configurable, two-stage Watchdog with programmable timeout
ranging from 125 ms to 4096 s in 16 steps

Serves for generating IRQ or hardware reset

System Timer

The Intel® QM57 chipset contains three 8254-style counters which have
fixed uses

In addition to the three 8254-style counters, the Intel® QM57 chipset in-
cludes eight individual high-precision event timers that may be used by
the operating system. They are implemented as a single counter each
with its own comparator and value register.

System Management

Thermal Management

CPU and board overtemperature protection is provided by:

Temperature sensors integrated in processor:

Two temperature sensors for monitoring the processor cores

One temperature sensor for monitoring the graphics controller and
the memory controller

One temperature sensor integrated in the Intel® QM57 chipset for mon-
itoring the chipset

Specially designed heat sink

Security

TPM

Trusted Platform Module (TPM) 1.2 for enhanced hardware- and software-
based data and system security (on request)

Software

uEFI BIOS

AMI Aptio®, AMI’s next-generation BIOS firmware based on the uEFI Specifi-
cation and the Intel Platform Innovation Framework for EFI.

LAN boot capability for diskless systems (standard PXE)

Redundant image; automatic fail-safe recovery in case of a damaged
image

Non-volatile storage of setting in the SPI flash (battery only required for
the RTC)

Compatibility Support Module (CSM) providing legacy BIOS compatibil-
ity based on AMIBIOS8

Command shell for diagnostics and configuration

EFI shell commands executable from mass storage device in a Pre-OS
environment (open interface)

Operating Systems

There are various operating systems available for the CP3002. For detailed
information, please contact Kontron.

Table 1-1:

CP3002 Main Specifications (Continued)

FEATURES

SPECIFICATIONS