beautypg.com

Bi-level mode, Floor mode, Mix mode – Jeep 2014 Cherokee - Owner Manual User Manual

Page 398: Defrost mode, Recirculation control

background image

Bi-Level Mode

Air is directed through the panel and floor outlets.

NOTE:

There is a difference in temperature (in any

conditions other than full cold or full hot), between the
upper and lower outlets for added comfort. The warmer
air goes to the floor outlets. This feature gives improved
comfort during sunny but cool conditions.

Floor Mode

Air is directed through the floor outlets with a
small amount through the defrost and side win-

dow demist outlets.

Mix Mode

Air is directed through the floor, defrost and side
window demist outlets. This setting works best in
cold or snowy conditions that require extra heat at

the windshield. This setting is good for maintaining
comfort, while reducing moisture on the windshield.

Defrost Mode

Air is directed through the windshield and side
window demist outlets. Use the DEFROST mode

with maximum blower and warm temperature settings
for best windshield and side window defrosting.

NOTE:

The air conditioning compressor operates in MIX

and DEFROST, or a blend of these modes even if the A/C
button is not pressed. This dehumidifies the air to help
dry the windshield. To improve fuel economy, use these
modes only when necessary.

Recirculation Control

Press this button to choose between outside air intake or
recirculation of the air inside the vehicle. A LED will
illuminate when you are in Recirculation mode. Only use
the Recirculation mode to temporarily block out any
outside odors, smoke, or dust, and to cool the interior
rapidly upon initial start-up in very hot or humid weather.

396

UNDERSTANDING YOUR INSTRUMENT PANEL