Cleaning the parksense® system, Parksense® system usage precautions – Jeep 2014 Cherokee - Owner Manual User Manual
Page 258
arc alerts will interrupt the
ЉPARKSENSE UNAVAIL-
ABLE WIPE REAR SENSORS
Љ, ЉPARKSENSE UNAVAIL-
ABLE WIPE FRONT SENSORS
Љ, or ЉPARKSENSE UN-
AVAILABLE SERVICE REQUIRED
Љ messages if an object
is detected within the five second pop-up duration. The
car graphic will remain displayed for as long as the
vehicle is in REVERSE. Refer to “Electronic Vehicle
Information Center (EVIC)” in “Understanding Your
Instrument Panel” for further information.
If
ЉPARKSENSE UNAVAILABLE WIPE REAR SENSORSЉ
or
ЉPARKSENSE UNAVAILABLE WIPE FRONT SEN-
SORS
Љ appears in the Electronic Vehicle Information
Center (EVIC) make sure the outer surface and the
underside of the rear fascia/bumper and/or front fascia/
bumper is clean and clear of snow, ice, mud, dirt or other
obstruction and then cycle the ignition. If the message
continues to appear see an authorized dealer.
If the
ЉPARKSENSE UNAVAILABLE SERVICE REQUIREDЉ
message appears in the EVIC, see an authorized dealer.
Cleaning The ParkSense® System
Clean the ParkSense® sensors with water, car wash soap
and a soft cloth. Do not use rough or hard cloths. Do not
scratch or poke the sensors. Otherwise, you could dam-
age the sensors.
ParkSense® System Usage Precautions
NOTE:
• Ensure that the front and rear bumper are free of snow,
ice, mud, dirt and debris to keep the ParkSense®
system operating properly.
• Jackhammers, large trucks, and other vibrations could
affect the performance of ParkSense®.
• When you turn ParkSense® off, the instrument cluster
will display “PARKSENSE OFF.” Furthermore, once
you turn ParkSense® off, it remains off until you turn
it on again, even if you cycle the ignition key.
256
UNDERSTANDING THE FEATURES OF YOUR VEHICLE