Char-Broil 463411512 - Manual (Page 19)

C
5
Tank Exclusion Brace
4
Machine Screws
Qty. 1
#8-32x3/8”
Tank Exclusion
Brace
□ Insert the end without hole into the left slot in the front panels, and then use one #8-32x3/8” machine screw
to attach tank exclusion brace to bottom shelf.
4 6
Grill Head
Machine Screws
Qty. 6
1/4-20x1/2”
A
Grill Head
□ This step requires two people to lift and position grill head onto cart.
□ Cut tie wraps from regulator hose and remove styrofoam. Carefully lower the grill head onto cart, making
sure the regulator hose and sideburner ignition wire are hanging outside cart . Rest the back and front of grill
head on tabs
protruding from front and rear legs as shown (A).
□ Open top lid, and use four 1/4-20x1/2" machine screws to attach grill head from inner firebox to cart side
braces as shown (B).
□ Use two 1/4-20x1/2" machine screws to attach grill head to the two
rear legs as shown (C).
B
19