Hollywood Racks Swing Away (Boomer style) - Manual

Tools Required: two adjustable wrenches, pliers,
¾” socket wrench recommended
Note: please do assembly near your vehicle as you
Can use your 2” receiver hitch as an assembly aid
When you open the Hollywood Swing Away,
you should find the following parts:
1. Inside frame (Fig. 1)
2. Outside frame (Fig. 1)
3. Top Plate with locking knob (Fig. 2).
4. Tie-down straps (3 for 2-bike, 5 for 4-bike)
5. Parts bags with the following parts: (fig. 3)
5a. Threaded Hitch Pin
5b. “R” Clip and Padlock for Hitch Pin
5c. Hinge hardware (fig. 3) including: 4-1/2” bolt,
washer and crown nut, two cotter pins (one extra)
5d. 6mm allen wrench
6. For 4 bike rack only: add on kit & hardware (see page 6)
Hollywood Swing Away 2 and 4 Bike Racks
Assembly and Installation Guide
Fig. 2
Fig. 1
Pg. 1