Hollywood Racks HR135 Tow N Go (3 bike version) - Manual

FIG. 1: Black threaded knob and
spacer block
Tow ‘n Go Hitch Rack
Model HR135 For 2” hitches only
Assembly and Use Instructions for Traveler Style Tow ‘n Go Hitch Rack
 Drive slowly when using the rack on bumpy or dirt roads.
 Check the rack bikes and straps regularly during use.
 If you have any questions or installation problems, please see your Hollywood Racks retailer or
contact Hollywood Racks at 800-747-4085.
Class III Hitch Required if you tow and carry bikes at the same time. A
longer hitch ball mount may be required for use of this product. (Tow N’ Go
requires 3” of space on your hitch ball mount insert tube)
After opening the Tow N’ Go box, you should
have the following parts:
1. Parts bag including:
a. Two black threaded knobs
b. Two pivoting spacer blocks
c. Allen wrench for set screws.
2. Upright “T” shaped main beam
3. Two Support arms with bike separators
attached.
4. Nine rubber straps & Safety tie-down strap