General Hydroponics AF30 - Manual (Page 4)

ASSEMBLY
STEP 5
Remove the Sprayline, DLT,
Net Pots and CocoTek Liners
from each of the Growing
Chambers and place the
Growing Chambers on the
Support Stand and Reservoir.
STEP 4
Slide the two Support Legs
into the SnapStand Bases and
the Snapstand Cross Fittings.
Snap the Cross Support into
the SnapStand Cross Fittings.
STEP 6
Lubricate the end of the DLT
with the Lubricant provided
and insert into the Growing
Chamber drain hole and align
with the holes in the Reservoir
Lid for each Growing
Chamber. Adjust water level
in Growing Chamber by
raising or lowering the DLT.