General Hydroponics AF60 Extension - Manual

AeroFlo
2
60
™
E X T E N S I O N
Step 1
Carefuly remove the existing Drain Assembly from
the AeroFlo 2 60 Reservoir and set it aside.
Step 2
Place the Extension Reservoir in-line with
the AeroFlo 2 60 Reservoir and connect the
two reservoirs with the Reservoir Coupler.
Place the Siphoning Elbow on the Reservoir
Coupler inside of the Extension Reservoir.
40 Gallon Reservoir
6 Chambers w/Spray Lines
Manifold Assembly
“Quick Stand” support strucure
Reservoir Coupler
60 Netcups 60 CocoTek Cups
Siphoning Elbow
Hydroton
FloraSeries Nutrients
AeroFlo 2 60 Extension Parts List
P.O. Box 1576 • Sebastopol, CA 95473
Phone (707) 824-9376 • Fax (707) 824-9377
www.generalhydroponics.com
© GENERAL HYDROPONICS 2002
Step 4
Remove the end cap from
the AeroFlo 2 60 manifold
assembly.
Step 5
Place the Extension
Chambers on the
Extension Reservoir.
Step 6
Thread the Extention
Manifold onto the AeroFlo 2
60 Manifold.
As you turn the manifold be
sure that the individual
manifold connections are
lined up with the Chamber
inlets to facilitate connect-
ing to the chambers.
Step 7
Attach the Manifold to the
individual Extension
Chambers. Insert the
Netcups, CocoTek Cups
and Hydroton media in the
Extention Chambers as
described in the AeroFlo 2
60 instructions.
Step 3
Insert the Drain Assembly removed from the
AeroFlo 2 60 into the lower grommet on the other
end of the Extension Reservoir.
lower grommet
on AF60 higher grommet
on Extension
Siphoning
Elbow on
Reservoir
Coupler