General Hydroponics AF20 User Manual
Page 4
ASSEMBLY
STEP 5
Attach the Flexible Pump Line
with the swivel hose fitting to
the Manifold and then attach
the Manifold to each of the
Laser Spray Lines. Make sure
there is a rubber gasket in
the Laser Spray Line fitting
and DO NOT OVER TIGHTEN.
Cover the inspection holes
with the DLT 4” Covers.
STEP 4
Lubricate the end of the DLT
with the Lubricant provided
and insert into the Growing
Chamber drain hole and align
with the hole in the Reservoir
Lid for each Growing Chamber.
Adjust the water level in the
Growing Chamber by raising
or lowering the DLT