Gastroback 42525 Multi - Cook User Manual

Page 20

4. Connect the appliance to the power supply and press the START button to switch on the

appliance.

5. Press the MENU button several times until the arrow on the display is pointing to the

“Soup” function. On the display, the minimum cooking time (30 minutes) is flashing.

The flashing of the time display indicates that you can adjust the cooking time via

the Timer buttons “+” and “–”.

6. Press the Timer buttons “+” and/or “–” until the desired cooking time between 30 and

90 minutes is shown on the display.

7. Press the START button to start the function. The operation indicator lights up

continuously. However, the cooking time starts as soon as the water comes to the boil

and a beep sounds. When the cooking time expires, an acoustic signal will sound

again, and the appliance will automatically toggle to the warm-keeping mode.

8. Press the KEEP WARM/OFF button to switch OFF the appliance. Then unplug the appliance.

WARNING: When opening the upper cover shortly after operation, condensate and a

large amount of steam could come out from under the brim of the upper cover. Thus, keep

a sufficient distance to the appliance to avoid scalding. Do not place the hot pot

on any heat- or moisture-sensitive surfaces. Do not use any hard or edged objects (e.g. metal

spoons) with the appliance to avoid damage to the surfaces, especially the non-stick coating.

Always use cooking utensils from heat-resistant plastic or wood (e.g. supplied soup ladle).
9. Press the opening button to open the upper cover and take out the food. For this, it is

best to use the supplied soup ladle.

10. Clean the appliance after each use. See: Care and Cleaning.

Warm-Keeping

You can use the multi-functional cooker for keeping your dishes warm. For this, the cooker

maintains a temperature of about 70 to 75 °C within the pot.
1. Fill your foods in the inner pot. Only fill the appliance up to a filling level between mark

1 and 5.5.
2. Place the inner pot in the appliance and close the upper cover.
3. Connect the appliance to the power supply and directly (with the appliance

switched OFF) press the KEEP WARM/OFF button. The KEEP WARM indicator lights up,

indicating that the appliance entered the warm-keeping mode. The display shows the time

of warm-keeping in 5 minute intervals.
Note: The other operating elements are blocked during warm-keeping. If you wish to use

another function, press the KEEP WARM/OFF button to switch OFF the appliance first. Then

switch ON the appliance using the START button.
4. You can stop the warm-keeping mode at any time. Simply press the KEEP WARM/OFF

button to switch OFF the appliance.