beautypg.com

Solving problems, Care and cleaning – Gastroback 42538 Design Multicooker Advanced User Manual

Page 18

background image

keep warm setting

The multicooker will automatically switch to the KEEP WARM setting once the RICE, RISOTTO

and SLOW COOK settings have finished cooking. It will keep KEEP WARM for up to 5 hours

on the RICE and SLOW COOK settings and up to 30 minutes on the RISOTTO setting.

solving proBleMs

If any problems occur during operation, you will find solutions in this section. Further informa-

tion on processing your food is given in section Tips for Best Results.

Problem

What to Do

The multicooker suddenly

switches off.

• Ensure power plug is connected properly to the appliance

and to power outlet.

• The appliance has been stressed or has overheated due to

cooking conditions. Push the desired cooking button and then

the START|CANCEL button to reset and continue cooking.

Allow a few minutes for appliance to reheat and continue

cooking.

The multicooker has

switched to KEEP WARM

setting before cooking is

complete.

• Press the START|CANCEL button to reset. Then, select the

desired cooking method to continue cooking.

cAre AnD cleAning

• Unplug the power cord from the power outlet.
• Allow all parts to cool before removing the removable cooking bowl. Wash the removable

cooking bowl, stainless steel steaming tray and glass lid in hot, soapy water, rinse and dry

thoroughly.

• Gastroback does not recommend that any parts of your multicooker are washed in a dish-

washer as harsh detergents and hot water temperatures may stain or distort the removable

cooking bowl and accessories.

• Do not use abrasive cleaners, steel wool, or metal scouring pads as these can damage the

non-stick surface.

• The housing can be wiped over with a damp cloth and then dried thoroughly. To prevent

damage to appliance do not use alkaline cleaning agents when cleaning, use a soft cloth

and a mild detergent.

note: If rice has cooked onto the bottom of the removable cooking bowl, fill the bowl with

hot, soapy water and leave to stand for approximately 10 minutes before cleaning.

wArning:

The appliance connector must be removed before the multicooker is cleaned

and that the appliance inlet must be dried before the multicooker is used again.
To prevent damage to the multicooker do not use alkaline cleaning agents when cleaning, use

a soft cloth and mild detergent.

50