Storage – Gastroback 42580 Vita-Spin-Fryer User Manual
Page 20
44
2.
Insert the oil container in the oven compartment. For this, hold
of the oil container by the brim, with the MIN/MAX filling level
marks orientated towards the hinge of the lid. Then, without vi-
olence, turn the oil container slightly back and forth until it settles
down in the oven compartment. Gently rotate the oil container
clockwise until it engages tangibly (to the stop). Push the oil contai-
ner release slider towards the oil container to lock the oil container
safely in place.
tip: You cannot close the lid with the container release slider not
closed completely.
3.
Insert the control unit (see figure E). For this, insert the heating
rods in the oil container, while the connector at the base of the
control unit must slide on the power socket at the housing of the
appliance. Gently press down the control unit. The black body of
the control unit may not protrude the housing of the appliance.
4.
Insert the basket (see figure F). The opening in the centre of the
basket must slide on the shaft in the oil container, and the black
plastic handle of the basket must be inserted in the guide in the
centre of the control unit.
tip: The basket is inserted correctly, if it stops in the upper position
and can only be lowered by pressing the basket release button.
5.
Hold the basket release button pressed, while lowering the bas-
ket completely down.
6.
Insert the hinges of the lid in the respective openings in the
upper brim of the housing of the appliance (see figure G). Then
press the hinges down at both sides until they engage with a click.
7.
Close the lid.
8.
Insert the filter insert into the filter opening and close the filter
cover (see figure H).
9.
Insert the dripping cup at the rear of the appliance.
StOrage
warnIng: Housing, lid, oil container and heating rod get very hot during operation. Al-
ways switch off (SPIN timer to 0, temperature dial to MIN) and unplug the appliance when it
is not in use. Let the appliance cool down, before cleaning or storing the appliance.
Always clean the appliance and all its parts before storing to avoid accumulation of dried-on
food (see: ›Care and Cleaning‹). Do not leave the appliance unattended while it is connected
to the power supply to avoid risk of electric shock and fire.
Ensure to store the appliance where it is clean, dry and safe from frost, direct sunlight and
inadmissible strain (mechanical or electric shock, heat, moisture) and where it is out of reach
of young children. Place the appliance on a clean and stable surface, where it cannot fall. Do
not place any hard or heavy objects on the appliance or any part of it.
Always handle the power cord with care. Power cords may never be knotted, twisted, pulled,
strained, or squeezed.
figure E
figure F
figure G
figure H