Gastroback 42580 Vita-Spin-Fryer - Manual (Page 18)

42
Care anD CLeanIng
warnIng: Always ensure that the appliance and any parts and accessories of it are out of
reach of young children. Always switch OFF the appliance (temperature dial set to MIN,
green indicator is illuminated), then unplug the appliance, and wait until the oil cooled down
(at least 3 hours), before cleaning the appliance. It will take a long time after operation for
the oil to cool down. Always ensure that the oil cooled down before disassembling, moving,
and/or cleaning the appliance. Do not attempt to move the appliance with the oil
in the oil container still hot! Otherwise, hot oil could be spilled, causing severe injuries
and damage.
Keep in mind that the parts of the appliance are fatty and oil could drip, when removing any
parts. Keep delicate objects in sufficient distance. Do not place the parts of the appliance on
surfaces that are sensitive to fat or moisture. It is a good idea to have a large dish or bowl at
hand.
Disassembling the appliance
1. Switch off (temperature dial to MIN) and unplug the appliance.
Let the appliance cool down for at least 3 hours. The oil in the oil
container may no longer be hot.
2.
Press the opening button to open the lid.
3. You can clean the lid much more easily, when removing the lid.
For this, push the little black lock buttons at both sides of the hinge
to the hinge. Then you can lift the complete lid up and out. (see
figure A).
ImpOrtant: The filter insert in the lid is fragile. It may not be
squeezed, bend, or pressed flat. Always handle the filter insert
with special care to avoid damage! Do not clean the filter insert
with any brushes or clothes.
4.
Remove the filter cover and carefully take out the filter insert
(see figure B). It is best to clean the filter insert in a small bowl with
hot dishwater. Just toss the filter in the dishwater. Thereafter rinse
with clear tap water. Place the filter insert on a dry kitchen towel.
Then leave it dry naturally.
tip: If the filter insert is damaged or soiled by oil vapour, you
should replace it.
warnIng: Do not replace the filter insert by any other type
of filter. Unsuited filters could catch fire during operation, thus
causing severe injuries and damage! Only use filter inserts dedicated for the appliance. For
replacement, get in contact with your vendor.
5.
Press the basket release button, lift up the basket, and remove it.
6. Lift the control unit up and out (see figure C).
For this, use the handle on top of the control unit. You can pull the handle somewhat out of the
control unit to get a better grip. Pull the control unit upwards and out.
ImpOrtant: Ensure, not to spill the oil, while removing the oil container.
figure A
figure B
figure C