Installing the main unit, English – Clarion MAX685BT User Manual

Page 76

MAX685BT

English

INSTAL

LATIO

MAN

UAL

6. INSTALLING THE MAIN UNIT

This unit is designed for fixed installation in the
dashboard.
1. When installing the main unit in NISSAN

vehicles, use the parts attached to the unit
and follow the instructions in Figure 6.
When installing the main unit in TOYOTA
vehicles, use the parts attached to the vehicle
and follow the instructions in Figure 7.

2. Wire as shown in Section 8 (see page 77).
3. Reassemble and secure the unit in the

dashboard and set the face panel and center
panel.

Installing the Main Unit in a NISSAN Vehicle

Note:
*1 Position the face panel with its wide edge at the bottom. Fit the edge into the groove of the main unit.

Mounting Screw Holes (Side View of the Main Unit)

For NISSAN vehicle

For TOYOTA vehicle

Figure 6

6-Spacer (thickness: 1 mm)

6-Flat head screw
(M5

u 8)

(attached to the main unit)

Mounting bracket
(1 pair for the left and right sides)

Finisher (*1)

Main Unit