Archived 4/2/10 – ETS-Lindgren HI-3510 RF Radiation Badge Broadband Electromagnetic Radiation Detector (Archived) User Manual
Page 8

HI
n
3510 Manual
Page — 3
SECTION I
INTRODUCTION
1-1
General
The Model HI-3510 Broadband Electromagnetic Radiation
Detector (see figure 1) is a portable, battery operated,
non-ionizing radiation hazard detector intended for
personal use. It detects electromagnetic radiation from
RF and microwave sources in the frequency range from
0.05 to 2.5 GHz and alerts the user to potentially
hazardous fields. The Model HI-3510 enables the user to
set the alarm warning level anywhere in the range from
0.2 to 20 mW/cm
2
. In addition, the user can choose
either of two measurement modes: instantaneous
exposure level or a six minute average measurement.
Both modes are displayed on a three digit LCD panel
along with a ten segment bar graph normalized to the
selected alarm warning level. Electrical, mechanical and
performance characteristics are described in table 1
below.
The Model HI-3510 is intended for use by personnel who
work with or service RF and microwave equipment such
as:
Ž
Microwave Ovens
Ž
Medical Equipment
Ž
Microwave Heaters and Dryers
Ž
Communication Systems
Ž
Cellular Telephones
Archived 4/2/10