ETS-Lindgren 2075 MiniMast (Archived) - Manual (Page 8)

Precautions MODEL 2075 MINIMAST™
4 © EMC TEST SYSTEMS, L.P. – MARCH 2002
REV D – PN 399235
PRECAUTIONS
Read this manual completely before starting installation. This
equipment should be installed and operated only by qualified
personnel.
The electrical installation of this product should be accomplished
by an individual who is authorized to do so by the appropriate local
authority. The installation should be in compliance with local
electrical safety codes.
Do not attempt to service the unit unless qualified to do so. As with
any electrical equipment, ensure unit electrical power has been
disconnected and secured when performing scheduled
maintenance or adjustments.
Do not make any modifications to this unit without consulting the
factory directly.
Stay clear of all moving components on this equipment.
Regularly inspect all equipment and conduct scheduled
maintenance in accordance with the factory recommendations
provided.
Only use replacement part and fasteners ordered directly from the
factory.
Do not, at any time, stand underneath the carrier assembly whether
moving or stationary.
Disconnect all air supply lines when servicing pneumatic
components.
Always use guy ropes provided for outdoor installations and
periodically check them for wear.
Do not exceed the load rating of the carrier. Refer to the product
specifications for the maximum weight limit.
WARRANTY
Archived 3/18/10