ETS-Lindgren 2075 MiniMast (Archived) - Manual (Page 7)

MODEL 2075 MINIMAST™ Model 2075 Options
© EMC TEST SYSTEMS, L.P. – MARCH 2002 3
REV D – PN 399235
MODEL 2075 OPTIONS
Model 2090 Positioning Controller: This controller provides
control for two separate devices (i.e. towers and turntables) in any
combination, plus the control of four auxiliary devices via a fiber
optic interface. The unit includes a GPIB connection and is
compatible with most popular EMI measurement software.
Hand Control Unit: This sturdy, hand-held controller will allow
the user to manually operate the tower remotely and independently
from the Model 2090 Positioning Controller. This controller
attaches conveniently to the electrical enclosure located on the
base of the tower. Functions include: up (UP), down (DN),
polarization and Hand/Main control selection.
Universal Antenna Mount: This option is a versatile and sturdy
mount for most common antennas.
Shield Room Feed-Through: This option allows the customer to
take the fiber-optic control cable from the control room to the
shield room while maintaining shielding attenuation. The unit is
made of brass for conductivity and provides attenuation of greater
than 100 dB at 10 GHz. A single 22.25 mm (.875 in) hole is
required to mount this option.
Additional Fiber Optic Cable: Various lengths of fiber optic
cable are available by custom order. The standard length provided
is 10 m (32.8 ft).
Motor Base Shielded Enclosure: A black shielded enclosure as
shown on the cover of this manual is available to go over the motor
base assembly.
Archived 3/18/10