ETS-Lindgren 2075 MiniMast (Archived) - Manual (Page 21)

MODEL 2075 MINIMAST™ Operation
© EMC TEST SYSTEMS, L.P. – MARCH 2002 17
REV D – PN 399235
NOTE: The dimension for the air gap is a nominal position.
Observe the motor starting characteristics after adjusting the gap.
The motor should start quickly. If not, increase the air gap by
turning the adjusting screw counter-clockwise increments.
After the adjustment is complete, replace the brake cover,
reconnect the air lines, close and clamp the top of the motor
enclosure and replace the brake access cover.
Archived 3/18/10