ETS-Lindgren HI-4433-STE Electric Field Probe - Manual (Page 41)

Series H-491198-36 Battery Charger | 41
Probe
Command
Description Probe Response
Rx
Set range.
• x=1, 2, 3, 4, or N (next
range)
Rx, where x is the range
• x=returns the range
currently in use
• x=1, 2, 3, 4 enables the
selected range
x=N sets the Field Probe to
the next higher range
Tx
Read temperature.
• x=C or F
For TF command:
Txxx
• xxx=temperature in
degrees in Fahrenheit
For TC command:
Txxx
• xxx=temperature in
degrees in Centigrade
Ux Set unit type.
• x=1, 2, 3, or N (next
unit)
• 1=V/m
• 2=mW/cm²
• 3=[V/m]²
Z Zero
Null
Send the ASCII null
character.
This is a special command that
can be used as the initial
command to the Field Probe
after it is turned on. The probe
responds with N.