ETS-Lindgren HI-4433-STE Electric Field Probe - Manual (Page 11)

Maintenance | 11
Maintenance
Before performing any maintenance, follow
the safety information in the ETS-Lindgren
Product Information Bulletin included with
your shipment.
WARRANTY
Maintenance of the HI-4433 Broadband
Isotropic Field Probe is limited to external
components such as cables or connectors.
To prevent electrical shock, do not remove
cover.
Warranty may be void if the housing is
opened.
If you have any questions concerning
maintenance, contact ETS-Lindgren
Customer Service.
Maintenance Recommendations
Maintenance of the HI-4433 probe is limited to external components such as
cables or connectors.
Annual Calibration
The HI-4433 probe assembly (sensor and electronics housing) requires an
annual calibration check to verify that they are performing within specifications.
See the Product Information Bulletin included with your shipment for information
on ETS-Lindgren calibration services.