ETS-Lindgren 2171B Boresight Antenna Tower - Manual (Page 50)

50 | Operation
E DIT C ONFIGURATION P ARAMETERS
Key Function
PARAM
To edit a configuration parameter:

Press PARAM key to display the current parameter.

Press PARAM key repeatedly to scroll through the parameter
list, displaying each parameter.
STEP (INC/DEC)
To scroll up or down the parameter list while viewing a parameter.
Reduces the effort necessary to scan through a long parameter list
using the PARAM key.
LIMIT/POSITION Press any of the LIMIT/POSITION selection keys to return the display
to that selection.
Press any of the remaining motion keys to return the display to the
current position and execute that motion.
Press the PARAM key again to return to the last displayed parameter
in the list, allowing easy transition between parameter adjustment and
device operation.
INCRM, DECRM,
or ENTER Once the desired limit, position, or parameter is visible in the display
window, press INCRM, DECRM, or ENTER to toggle into edit mode.
The lowest adjustable digit will flash on and off.
LOCAL Press the LOCAL key for that device to switch the flashing digit to the
next higher digit. In this way, it is possible to rapidly adjust any digit of
a multi-digit parameter or limit.