Mgr-828c – Dyras MGR-828C User Manual

Page 5

MGR-828C

Using or storing the appliance in a wet, humid or damp environment can cause:

- deterioration and premature aging of the cover and electric insulation of the appliance,
- premature wearing and aging of the plastic and rubber components,
- rust and corrosion affecting electrical components and metal parts.

Using the appliance in a dusty environment or in the kitchen (where the air may be contaminated
with vapours from cooking oil or grease) can cause:

- greasy dust coatings on the mechanical and electrical elements and the casing of the appliance,

which could result in electrical contact failure or even complete breakdown, and could also
damage the plastic and rubber elements.

The effects of direct sunlight on the appliance can include:

- accelerated deterioration of the appliance casing and its plastic and rubber components,

damage to strength and other structural features. The appliance’s surface may become porous
and fragile, which may result in a safety risk.

Continuous or commercial use may result in:

- the appliance suffering from premature wear and tear,
- the motor failing or becoming damaged due to overheating.

Storing the appliance in cold or frosty environment may cause:

- damage to the plastic and rubber components; if they become fragile,

this may result in a safety risk.

- oxidation resulting from condensation, and corrosion of the metal components.

Direct and indirect heat (e.g. being too close to an oven or a heating appliance) can cause:

- damage, deformation, softening or melting of plastic or rubber parts and casing elements, or

deterioration of electrical insulation.

In order to increase the useful life of the appliance and prevent inefficient use, avoid the occurrence
of the above faults and always follow the instructions of the operating manual; failure to observe
the above will constitute improper operation for which the manufacturer will not be liable.
It is recommended that the appliance is checked by an authorised service engineer at regular
intervals even if no defects are detected - in this way a potential defect can be corrected at an early
stage, increasing the useful life of the appliance.

Please respect the environment when the appliance reaches the end of its life. Electrical products
must not be disposed of with other residential waste because they can damage the natural world
and may be hazardous to human health. You should dispose of the appliance at an appropriate
recycling site or by using a collection service that specialises in electrical appliances.

You may wish to contact the retailer or the manufacturer if you are unable to find convenient local
recycling facilities as they have some legal responsibilities for recycling electrical products.

User'sManual MGR-828C.indd 5

2012.11.14. 15:22:49