Coral Industries 6000 Bypass with DTB Towel Bar - 2621-G - Manual (Page 4)

2621 6/99
5
7
Lift inside door panel into header with towel bar facing inside
of bath. Seat rollers in roller track while guiding bottom of door
into sill guide. Repeat for outside door, hanging panel with
towel bar facing outside of bath.
Mount rollers (G) to top channel of doors using 8-32 x 3/8" truss
head screws (H). Rollers are to be mounted on same side
of doors as towel bars and at the midpoint of slots.
Rollers may be positioned up or down in slot to adjust for out
of plumb situations.
Header
Inside
Panel
MIRROR UNITS
Mirror panel should be hung as outside
panel with pull handles facing outside of
bath.
6
H
8-32 x 3/8"
Truss Head
Screw
G
Roller
Seal unit by caulking along outside of enclosure where metal and bath meet, especially where sill and tub meet.
If desired, caulk inside enclosure where jambs meet walls.
C
OUTSIDE
OF BATH
MIRROR UNITS
Mirror unit uses towel bar / pull handle kit (N). Pull
handles are to be mounted on mirror side of mirror
(outside) panel. Towel bar is to be mounted on inside
panel facing inside of shower.
Insert towel bar (D) into brackets from towel bar kit (F). Mount
brackets to door panels at prepunched holes using 8-32 x 3/8"
truss head screws.
On units with clear, painted glass,
the painted surface of glass faces
outside of shower.
On units with tinted, painted glass,
the painted surface of glass faces
inside of shower.
Towel Bar D
8-32 x 3/8
Truss Head
Screw
Note: Towel bar for outside panel faces outside of
shower, while towel bar for inside panel faces inside of
shower.
F
Towel Bar
Bracket
F
Towel Bar
Pull Handle
Mirror Panel
INSIDE OF SHOWER
8-32 x 3/8
Truss Head
Screw
Pull
Handle
N
26
21
Inside
Panel
Outside
Panel
Header
C
Sill
A
Guide
I