Cabletron Systems 6C105 - Manual (Page 35)

Removing and Reinstalling the Fan Tray
6C105 Overview and Setup Guide 3-15
Figure 3-8 Removing the Fan Tray
3.5.2 Reinstalling the Fan Tray
To reinstall the fan tray, refer to Figure 3-9 and proceed as follows:
1. Locate the ESD wrist strap shipped with the 6C105. Attach the ESD
wrist strap to your wrist and plug the cable from the ESD wrist strap
into the ESD grounding receptacle at the upper right corner of the
6C105.
2. Hold the sides of the fan tray.
3. Line up the rails on each side of the fan tray with the slot guides on the
chassis.
!
CAUTION
In the following step ensure that you do not force the fan tray
into place, as it may damage the unit.
Slotted Screws (2)
1 2 3 4 5 PS1 PS2
2016_20
6C405