Cabletron Systems 6C105 - Manual (Page 18)

Chapter 2: Installation Requirements and Specifications
2-4 6C105 Overview and Setup Guide
2.3.2 Power Supply Requirements
The power supply requirements for the 6C205-1, 6C205-2 and 6C205-3
power supply modules are as follows:
6C205-1 AC Power Supply
6C205-2 DC Power Supply
6C205-3 AC Power Supply
2.4 LEDs
The following sections describe the functions and definitions of the
LANVIEW LEDs for the power supply module and the fan tray unit for
the 6C105.
2.4.1 Power Supply LEDs
There are two LEDs on the power supply. Table 2-1 describes the
different states of the power supply LEDs and their definitions. Refer to
Figure 2-1 for the location of power supply LEDs.
Input Frequency: 50/60 Hz
Input: (Voltage/Current): 100 to 125 Vac, 6.2 Amps
200 to 250 Vac, 3.1 Amps
Input Frequency: NA
Input: (Voltage/Current): 48/60 Vdc, 17 Amps
Input Frequency: 50/60 Hz
Input: (Voltage/Current): 100 to 125 Vac, 8 Amps
200 to 250 Vac, 4 Amps
NOTE
All three power supplies available for the 6C105 chassis have
the same LEDs.