Code 3 SuperVisor for Chevy Tahoe - Manual (Page 6)

6
FIGURE 9
Mounting the SuperVisor™
Before mounting the SuperVisor, apply gasket stripping to the front edge of the lower chassis in order to prevent scratching the windshield (see
Figure 9). Once all four brackets and sun visors are attached, the SuperVisor is now ready to be installed. Fold both sun visors in the up position
(see Figure 10). Fold the rear view mirror down as far as it will go to get it out of the way for the SuperVisor. Position the SuperVisor by pointing the
center front portion of the lower chassis up above the rear view mirror and raise the back of the lower chassis into a level position. Position the
SuperVisor in the center of the windshield (as shown in Figure 11). Note:it may be necessary to gently pull back on the mounting brackets to
slip the SuperVisor's lower chassis behind the mounting brackets.
FIGURE 10 FIGURE 11