Code 3 RX 2700CC - Manual (Page 13)

13
Troubleshooting
All RX 2700™ Lightbars are thoroughly tested prior to shipment. However, should you encounter a problem during installation or during the life of the
product, follow the guide below for information on repair and troubleshooting. Additional information may be obtained from the factory technical help
line at 314-996-2800.
LED MODULE
TROUbLEShOOTINg gUIDE
Note: LED modules must be replaced as a module. There are no user serviceable parts.
PRObLEM QUESTIONS POSSIbLE CASUE SOLUTION
LED directional module not
operating
Are all head out in front or in back,
and not just a single directional
module out?
Yes
No
a. Front and/or rear cut function
powered
a. Defective module
b. Cable/Connector unplugged
a. Remove power (turn off) Front
and/or Rear Cut
a. Replace module.
b. Check cable & connector
LED corner module has on head
out.
N/A a. Defective module
b. Cable/Connector unplugged
a. Replace module.
b. Check cable & connector
Cruise Lights do not operate N/A a. No power on Cruise wire
b. Another central controller
function is on.
a. Connect Cruise wire to switch
b. Turn off other functions.