Code 3 RMX Lightbar - Manual (Page 4)

4
Code 3® PriZm II™ LED Refl ector 360° Corner Modules
The RMX Lightbar is equipped with Code 3® PriZm II™ LED Refl ector 360° corner LED modules that provide a full 360° of
warning. The lighthead has been designed to exceed all applicable requirements for 360° warning devices in Red, Blue, Amber
and White.
Operating Specifi cations for 360° module:
Operating Voltage: 10-16 VDC, Reverse Polarity Protection
Current Draw : Red/Amber - .5A avg @ 12.8 Volts
Blue/White - .8A avg @ 12.8 Volts
Available Colors - Red, Blue, Amber and White
This Product contains high intensity LED devices. To prevent eye damage, DO NOT stare
into light beam at close range.
LED Fusing Considerations
Although the average current draw per module is very low, due to the type of circuit used to power each module the instantaneous
peak current to a module can be signifi cantly higher during low voltage conditions. To avoid prematurely blowing ATO style fuses or
tripping breakers, it is recommended the following rule-of-thumb be used to size fuses or breakers. This is especially important in
lightbars with many LED modules running off a single fused source.
Minimum fuse size calculation:
1.5 x (number of modules being fused)
Example:
RMX Lightbar with 2 corner modules (2 per module) and 14 directional modules.
Minimum fuse requirement for single fuse - 1.5 (2+2+14) = 27A minimum
OPTIONS & SPECIFICATIONS
Many options are available for the RMX™. This section is designed to describe the function of the various options.
LED WARNING MODULES
WARNING!
DIMENSIONS
The RMX measures 5.4" high and is 12.25" front to back. It is available in the following lengths:
18"
36"
47"
58"
69"
80"
91"