Code 3 PSE235 Remote Strobe Power Supply - Manual (Page 2)

Introduction
The PSE235 Series Remote Strobe Power Supply represents the latest in state-of-the-art strobe warning
technology. The latest in MOSFET technology and microprocesser control provide efficient and reliable
operation. The model PSE235 is versitile and economical strobe power supply providing two alternating
strobe outlets. When connected to
CODE 3 ® line of oval and round remote strobe heads, remote 360 bea-
con, and accessories the PSE235 delivers an outstanding level of vehicle warning signals.
Standard Features
All MODEL PSE235 two-head Remote Strobe Power Supplies come equipped with the following standard features:
(See Figure 3, page 5)
MULTIPLE OPERATING VOLTAGES
10-30 VDC operation only. Reverse polarity protected
INTERNAL FUSE PROTECTION
User replaceable 7.5 AMP, ATO style fuse.
OUTPUT SHORT CIRCUIT/FLASHTUBE FAILURE PROTECTION
Power supply will shut-off when trying to flash any heads that have been shorted, or have a failed flash tube.
MULTIPLE USER SELECTABLE FLASH PATTERNS
User may select either Double Flash or Quad Flash.
HI/LO POWER CONTROL
Allows reduction of strobe light intensity for night time use. The Lo power control is +VDC switched.
Specifications
OPERATING VOLTAGE: 10-30 VDC
OUTPUT POWER: 35 WATTS NOMINAL
STANDARD FLASH RATE: EACH STROBE LIGHT OUTLET 60 QUAD FLASHES/MIN.
POWER CONSUMPTION: 3.5 AMPS AVERAGE AT 12.8 VDC (HIGH POWER)
1.75 AMPS AVERAGE AT 25.6 VDC (HIGH POWER)
2