Code 3 LED X Exterior Lights - Manual (Page 3)

Features and Specifications:
Operating Voltage: 10-16Vdc (+12V version), 22-30Vdc (+24V version), Reverse
Polarity Protection. 50% Duty Cycle unless otherwise stated.
Flash Rate: 70 fpm minimum
Flash Modes (Flashing version only):
1. Cycle-Flash: Cycles through Triple, Quad, Double, and Fast
Single modes at approximately 109 fpm.
2. Triple-Flash: Three consecutive pulses per flash at
approxmately 83 fpm.
3. Quad-Flash: Four consecutive pulses per flash at
approximately 77 fpm.
4. Double-Flash: Two consecutive pulses per flash at
approximately 78 fpm.
5. Single-Flash: Single flash pattern at 75 fpm.
6. Quad-Flash 70% Duty Cycle: Can be used for NFPA.
7. Steady-burn: Continuous ON-state operation.
Flashing Current Draw: Red/Amber:
Single - .25A Avg.
Dual - .5A Avg.
Blue:
Single - .4A Avg.
Dual - .8A Avg.
Steady Burn Current Draw: Red/Amber:
Single - .5A Avg.
Dual - 1.0A Avg.
Blue:
Single - .8A Avg.
Dual - 1.6A Avg.
Available colors - Red, Amber or Blue or any combination for dual modules.
Available configurations - Single or dual light heads, Amber, Red, or Blue.
Introduction:
The Exterior LED modules are weatherproof LED based warning light modules that contain
state-of-the-art high intensity LEDs. These products provide eight different operation modes
including a steady-burn mode. These products may be adapted to a variety of exterior
applications such as motorcycle applications, OEM fire truck, grill light and back-deck
applications. The exterior LED is available in either a +12V or a +24V version.
3