Code 3 LED X Exterior Lights - Manual (Page 2)

!
This Product contains high intensity LED
devices. To prevent eye damage, DO NOT
stare into light beam at close range.
WARNING!
!
The use of this or any warning device does not insure that all drivers can
or will observe or react to an emergency warning signal. Never take the
right-of-way for granted. It is your responsibility to be sure you can proceed
safely before entering an intersection, driving against traffic, responding at
a high rate of speed, or walking on or around traffic lanes.
The effectiveness of this warning device is highly dependent upon correct
mounting and wiring. Read and follow the manufacturer’s instructions before
installing or using this device. The vehicle operator should insure daily that
all features of the device operate correctly. In use, the vehicle operator
should insure the projection of the warning signal is not blocked by vehicle
components (i.e.: open trunks or compartment doors), people, vehicles, or
other obstructions. This equipment is intended for use by authorized
personnel only. It is the user’s responsibility to understand and obey all laws
regarding emergency warning devices. The user should check all
applicable city, state and federal laws and regulations.
Code 3 , Inc., assumes no liability for any loss resulting from the use of this
warning device. Proper installation is vital to the performance of this warning
device and the safe operation of the emergency vehicle. It is important to
recognize that the operator of the emergency vehicle is under psychological
and physiological stress caused by the emergency situation. The warning
device should be installed in such a manner as to: A) Not reduce the output
performance of the system, B) Place the controls within convenient reach
of the operator so that he can operate the system without losing eye contact
with the roadway.
Emergency warning devices often require high electrical voltages and/or
currents. Properly protect and use caution around live electrical connec-
tions. Grounding or shorting of electrical connections can cause high current
arcing, which can cause personal injury and/or severe vehicle damage,
including fire.
PROPER INSTALLATION COMBINED WITH OPERATOR TRAINING IN
THE PROPER USE OF EMERGENCY WARNING DEVICES IS ESSEN-
TIAL TO INSURE THE SAFETY OF EMERGENCY PERSONNEL AND
THE PUBLIC.
WARNING!
2