Code 3 LED Hide-A-Blast - Manual (Page 8)

Code 3

is a registered trademark of Public Safety Equipment, Inc. a subsidiary of Public Safety Equipment, Inc.
CycleFlash is a trademark of Public Safety Equipment, Inc.
Public Safety Equipment, Inc.
10986 N. Warson Road
St. Louis, Missouri 63114-2029—USA
Ph. (314) 426-2700 Fax (314) 426-1337
Revision 0, 06/08- Instruction Book Part No. T11620
©2008 Public Safety Equipment, Inc. Printed in USA
WARRANTY
This product was tested and found to be operational at the time of manufacture. Provided this
product is installed and operated in accordance with the manufacturer's recommendations, Public
Safety Equipment guarantees the HB Series LED Light for a period of 5 years from the date of pur-
chase or delivery, whichever is later. Units demonstrated to be defective within the warranty period will
be repaired or replaced at the factory service center at no cost.
Improper installation or use of inappropriate or inadequate wiring or circuit protection causes
this warranty to become void. Failure or destruction of the product resulting from abuse or unusual
use and/or accidents is not covered by this warranty. Use of non-PSE components and assemblies
may cause damage to the system and/or personal injury, and voids all warranties on PSE systems
and components.
PSE shall in no way be liable for other damages including consequential, indirect or special
damages whether loss is due to negligence or breach of warranty.
PSE MAKES NO OTHER EXPRESS OR IMPLIEd WARRANTY INCLUdINg, WITHOUT
LIMITATION, WARRANTIES OF FITNESS OR MERCHANTABILITY, WITH RESPECT TO THIS
PROdUCT.
PROdUCT RETURNS
In order to provide you with faster service, if you are going to return a product for repair or
replacement*, please contact our factory to obtain a Return Goods Authorization Number (RGA
number) before you ship the product to PSE. Write the RGA number clearly on the package near
the mailing label. Be sure you use sufficient packing materials to avoid damage to the product being
returned while in transit.
*PSE reserves the right to repair or replace product at its discretion. PSE assumes no responsibility or li-
ability for expenses incurred for the removal and/or reinstallation of products requiring service and/or repair.
For Technical Support / Service, please call 314-996-2800